Hitno! beholder ms 1 gimbal za dslr

Prodajem Beholder MS 1 + 3 baterije gratis.
Gimbal je stigo iz inostranstva, ukljucio sam ga samo jednom da vidim kako funkcionise .

Cijena novog Beholdera je 600 dolara.
http: // bhphotovideo. com/c/product/1180478-REG/ikan_beholder_ms1_mirrorless_camera. html



The Beholder MS1 3-Axis Motorized Gimbal Stabilizer brings the simplicity and flexibility of a handheld smartphone gimbal stabilizer to the world of mirrorless cameras. It features a 3-axis, motorized gimbal designed to keep your camera level and isolated from hand shake while allowing you to create smooth, organic moving camera shots. The MS1 features two operational modes: a following mode that smoothes your camera movements and a lock mode that will hold your camera in its position as you move. The MS1 features a thumb button/joystick which you use to select modes. You can also use the joystick to pan and tilt your camera on the gimbal.

The gimbal features a baseplate and sliding camera plate that allows you to adjust the balance of your camera on the sled, both left-to-right and forward-to-back. An included offset balance plate expands the range of cameras that you can use with the Beholder.



TermsThe terms pitch, roll, and yaw are often used to describe its axes of stabilization with this type of stabilizer. For those camera operators that are not familiar with these terms, if your camera was mounted on a tripod, the terms would translate as follows:
Yaw = Pan
Pitch = Tilt
Roll=Level (Horizon)




ModesThe MS1 supports two modes: Follow Mode and Lock Mode.
Follow Mode stabilizes the camera and allows it to follow your movements as you pan and tilt.
Lock Mode stabilizes the camera and holds in position even if you pan, tilt, or try to Dutch (off level the camera), until you reach the physical limit of the motor. Thumb Button/JoystickThe thumb button/joystick incorporated into the handle allows you to select the mode. It also allows you to pan or tilt your camera on the gimbal. Sliding Balance PlateOnce you have balanced the camera side-to-side, the sliding balance plate allows you to quickly rebalance your camera front-to-back when changing lenses without having to rebalance the camera side-to-side or remount it on the stabilizer. MountingYou can mount a variety of cameras to the stabilizer. The Offset plate has 5 additional 1/4"-20 positions to balance many different weighted cameras and lenses.

Podelite sa prijateljima: